SEW-EURODRIVE Products: MOVIAXIS®

Products

With its new MOVIAXIS^® multi-axis servo inverters, SEW-EURODRIVE offers innovative, future-oriented solutions in the field of highly dynamic servo drive technology.

These units handle dynamic and accurate application and automation tasks with optimized expenditure of time, costs and resources. Depending on the machine and system concept required, MOVIAXIS^® multi-axis servo drives can be combined flexibly and adapted to meet automation requirements.

Your advantages:

On-board, free of charge technology integrated in the unit offers many solution options even in combination with a standard PLC

Motion control functionality can be enhanced in steps and can "grow" with the machine (unit internal technology, MOVI-PLC^® basic, MOVI-PLC^®advanced.)

Highly sophisticated features – Ethernet TCP/IP, USB, data storage, axis parameters/data auto re-load after replacement, double-CAN,...

Optimum combination options with all other SEW drive products, for tailor-made solutions

Saves time in implementing motion control tasks thanks to integrated functions

Quick and easystartup and operation thanks to graphical and user-guided interfaces

Multi-motor operation eliminates the need for additional inverters e.g. for alignment tasks

Offers maximum dynamic response and control qualities for highly dynamic tasks

Requires little installation space – while enabling integral, simple convection cooling and high power density (250% overload capacity)

Master modules
	MOVIAXIS^® master module with fieldbus gateway (in preparation)
	MOVIAXIS^®master module with MOVI-PLC^® basic motion control
	MOVIAXIS^® master module with MOVI-PLC^® advanced motion controller (in preparation)


Sizes	Rated currents
Sizes	4 kHz operation	8 kHz operation	16 kHz operation
Size 1	2, 4, 8 A axes		1.5, 3, 5 A axes
BG2	12, 16 A axes		8, 11 A axes
BG3	32, 43 A axes	24, 32 A axes	13, 18 A axes
BG4	64 A axes	48 A axes
Size 5	85 A axes	64 A axis
Size 6	133 A axes	100 A axis
Axis modules either communicate directly with a controller via the integrated system buses and fieldbus option cards or are controlled centrally via a master module. The modules have the following features: Maximum rated power overload of 250% for maximum 1 s (max. 250 A); the overload time increases for lower overloads Option to switch between a maximum of 3 motors with individual parameter sets Integrated technology functions such as electronic cam, synchronous operation, touch probe, etc. Can be controlled with user units Central data backup / parameter module Integrated DC 24 V brake control USB & ETHERNET TCP/IP via master module as parameter interfaces Firmware upgrade / parameter upgrade via fieldbus / parameter interface Optional: Safe stop, cat. 3 or 4 with performance level "d" or "e" Optional: High speed system bus on ETHERNET basis (in preparation)

Supply modules
	Services
	10 kW (13 hp), 25 kW (34 hp) (in preparation), 50 kW (67 hp) and 75 kW (100 hp)
	The supply modules provide the connected axes with power. They have a high overload capacity and regulate the regenerated power according to the unit version. Features: Maximum overload of up to 250% of the rated power for maximum 1 s High effective current percentage, minimized charging currents and mains-friendly harmonic behavior Versions with: Integrated DC link buffer and braking resistor for very dynamic applications Integrated brake chopper Optional DC link buffer and brake chopper Regenerative power supply (in preparation) All connected CAN axis modules addressed automatically

Optional components
	Switched-mode power supply module As required, the DC 24 V SMPS provides MOVIAXIS^® with power from the DC link with up to 600 W (0.805 hp) on a maximum of 3 channels. An external DC 24 V backup voltage can also be supplied.
	DC link discharge module This system component was developed to prevent very sensitive machine and plant components or tools / devices from colliding. In case of unintentional power failure, the component discharges the DC link of MOVIAXIS^®.
	Capacitor module / buffer module This energy buffer can be combined as an option with the power supply modules to implement highly energy-efficient applications with fast cycle times.
	Axis option cards The following option cards can be added to extend the functionality of the MOVIAXIS^® axis modules: PROFIBUS, analog, digital and I/O input and multi-encoder cards. The multi-encoder card enables diverse encoder systems to be connected to keep the number of connections to a minimum. The range of products covered includes remote HIPERFACE^® laser encoders, SSI and sinusoidal encoders through to high-resolution EnDat systems.