Products
Drive engineering from SEW-EURODRIVE meets the challenge of avoiding industrial accidents while maintaining trouble-free and
economical system operation. Compliance with DIN EN 954-1 and EN 13849-1, intended to minimize the risk posed to people by
technical equipment, allows for the installation of system control that monitor the production process instead of switching
it off. The control systems applied must satisfy the relevant requirements regarding safety and performance level.
SEW-EURODRIVE solves all these challenges with flexible safety technology, either modular or integrated, that is individually
adapted to the application and requirement.
Drive electronics with integrated safety technology/control cabinet:
- MOVITRAC® B frequency inverters
- MOVIDRIVE® B drive inverters
-
-
-
DFS11B PROFIsafe / PROFIBUS with output for safe disconnection of the MOVIDRIVE®
-
DFS12B PROFIsafe / PROFIBUS with CAN connection for DCS21B
-
DFS21B PROFIsafe / PROFINET with output for safe disconnection of the MOVIDRIVE®
-
DFS22B PROFIsafe / PROFINET with CAN connection for DCS21B
-
DCS21B safety monitor for monitoring speed and position and PROFIsafe connection
-
DCS31B safety monitor for monitoring speed and position
Decentralized:
- Gearmotors with integrated MOVIMOT® frequency inverter
- MOVIFIT® drive control for innovative, decentralized field installations
-
-
-
FC series: Open-loop frequency inverter
-
MC series: Up to three MOVIMOT® may be connected with a hybrid cable
- Field distributor
Servo:
Modular and universal safety technology – drive electronics:
MOVIMOT® modular safety monitor (application-dependent)
- UCS21A with speed and position monitoring and PROFIsafe connection
- UCS31A with speed and position monitoring
- UCS41A with speed monitoring
Electromechanics and mechanics:
