www.sew-eurodrive.com

Login
 
You are here: Home >

AC Motor DT/DV Series

Start Configurator
Documentation
  Documentations for: AC Motor DT/DV Series
Products
Your benefits

AC Motor DT/DV Series
DT / DV series
DT/DV series AC motors and AC brake motors are the ideal match for SEW-EURODRIVE standard gear units. Our wide range of variants ensures that we have the right motor for your application, whether you need 2-pole, 4-pole, 6-pole or 8-pole or pole-changing. SEW-EURODRIVE brake motors have integrated DC safety disk brakes. The brake control is installed in the terminal box as standard, but is also available in control cabinet version as an option. The patented two-coil brake system facilitates high starting frequency and positioning accuracy with particularly short response and reaction times.

Technical data
AC motor
AC brake motor
Power range
[kW]
0.09 to 90
Braking torques
[Nm]
1.2 to 1,200
No. of poles
Single-speed
2 / 4 / 6 / 8
Switchable
4/2 / 6/2 / 8/2 12/2 6/4 8/4
Synchronous speed
[rpm]
3,000 / 1,500 / 1,000 / 750 / 500
Frequency
[Hz]
40 to 60 (Standard: 50)
Voltage, single-speed
[V]
220 to 690
Voltage, pole-changing
[V]
Shaft height 63 to 90: 220 to 500
Shaft height 100 to 225: 220 to 690
Voltage range 2-pole / 4-pole / 6-pole
[V]
220 to 240 / 380 to 415 or
380 to 415 / 660 to 690
Degree of protection
 
IP54, and on request: IP55, IP65, IP56 and IP66
Explosion protection
EU directive 94/9/EC
 

 
back to top